Single Girder Overhead Traveling Crane Manufacturing

atraminis1

Single girder overhead traveling cranes are supported on rails and are designed for load transfer and transportation. The maximum load capacity of these cranes can reach up to 25 t, the maximum span up to 24 m, and the lifting height up to 50 m. Cranes can be used for indoor and outdoor service at room / ambient temperatures ranging from -20°C to +40°C.

 

Single girder overhead traveling cranes are operated from the ground via cable-connected control pendant or radio remote control. In addition, double control is possible by switching control from control pendant to radio remote control, and vice versa. Cranes can be equipped with one or two hoists based on the number of hoists used.

 

Single girder overhead traveling cranes are cost-efficient and lightweight. Their compact and lightweight design requires less building space and ensures efficient use of the building height.

 

These cranes are supplied with a hook, magnet or vacuum beams.

 

The crane can be provided with custom service platforms, maintenance walkways and auxiliary lifting equipment. The crane itself can be manufactured with ​​explosion-proof installations.

atraminis2

1. Lifting capacity Q = max 25 t
2. Span La = max 24 m
3. Base A = relative to La
4. Hook height H = max 50 m
5. Extreme positions of the hook L1 and L2 = relative to the hoist design
6. Distance between the runway rail and the hook H1 = relative to the bridge and hoist design
7. Distance between the runway rail and the bridge H2 = relative to the bridge and trolley design
8. Operating mode (FEM / ISO 4301/1) 1Am (M3) to 4m (M7)
9. Operating speeds:
 – lift speed max 10 / min 0,5 m / min
 – hoist travel speed 20 / 5 m/min
 – crane travel speed max 40 / min 8 m/min
10. Power supply 400 V
11. Control voltage 48 V
12. Frequency 50 Hz
13. Operating temperatures -20ºC ÷ +40ºC
14. Crane control via cable-connected control pendant or radio